I squared all of your mapping, and split some.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164791599

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166986208

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166978166

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166941390

Task is not finished, but your mappings looks good. 1 in the upper left corner needs squaring.

• To square the corners of buildings, select the building and type 'Q
• Using the Issues tool on the right-hand side of the iD editor helps you to check your own and other mappers’ work before exiting the task. Click the issues icon or type ‘i’ to open the menu. To find all unsquared buildings, change value to “up to 20°”.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166937597

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166895056

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166902012

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166889242

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166781402

@[JaphetMasunzu] , hello, could it be you missed "There is a misalignment between the imagery and the existing data, please use the following offset in this project: -0.75; -1.72" ?
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166779007

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166654756

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/166641633

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165372722

Die Gebäude sehen gut aus. Nur sie berühren sich mit der Strasse.

Im iD-Webeditor verhindert das Gedrückthalten der Alt-Taste, dass Knotenpunkte aneinander einrasten und sich versehentlich verbinden. Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165346048

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165322468

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165324800

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165158387

had to delete older, clustered, glued mappings
---

Published using OSMCha: https://osmcha.org/changesets/165086272

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165023811

Hello, thanks for mapping and welcome to HOT. Thank you for your contribution. The buildings you mapped are well done as to their location. But pay attention to the squareness of the corners. Always draw buildings as square and precise as you can. Then add the Building feature type. And last, right click it and click the square icon. Or just hit the Q-key.
Also please keep in mind: many buildings are very close but do not actually touch each other, try to map them close to each other without letting them connect or share nodes with each other, roads, or residential area outlines. In the iD web editor, holding down the "alt" key will keep nodes from "snapping" to each other and accidentally connecting. Thanks so much for your contribution, Norbert 'Nodi' Dichter, HOT validator.
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165023588